+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NU 319 ECJ: ⌀95 × ⌀200 × 45 mm⌀200⌀9545NU 319 ECJ
Fig. 1: NU 319 ECJ, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 319 ECJ

Load: radial high; no axial loadCylindrical roller NU

Bearing SKF NU 319 ECJ

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 16 approximate
d
95 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
200 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
45 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
390 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 95 × 200 × 45 from other brands

18 products
Series illustration (not a photo of this item): NU 319 ECJ
You are viewingSKF NU 319 ECJ

Same size, different design: the difference is written in the row.

  • Photo: N 319 ECMN 319 ECMreinforced design EC, different cageSKF95 × 200 × 452 pcs€716.80Request a quote
  • Cross-section drawing to size: Cylindrical roller N, 95 × 200 × 45 mmN319different designCT95 × 200 × 45available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 95 × 200 × 45 mmN319 MMCT95 × 200 × 45available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU 319 ENU 319 EECT95 × 200 × 45available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 95 × 200 × 45 mmN 319 E-XL-M1E, M1, XLFAG95 × 200 × 45available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 95 × 200 × 45 mmN 319 E-XL-M1-C3clearance C3, E, M1, XLFAG95 × 200 × 45available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 95 × 200 × 45 mmNJ 319 E-XL-M1-C3clearance C3, E, M1, XLFAG95 × 200 × 45available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 95 × 200 × 45 mmNU 319 E M1E, M1FAG95 × 200 × 45available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 95 × 200 × 45 mmN 319 ECMEC, MNTE95 × 200 × 45available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 95 × 200 × 45 mmN319different designNTE95 × 200 × 45available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 95 × 200 × 45mm
Cdynamic 390kN

Cylindrical roller NU bearing NU 319 ECJ.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 319 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet