+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of NU 206 ECP: ⌀30 × ⌀62 × 16 mm⌀62⌀3016NU 206 ECP
Fig. 1: NU 206 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NU 206 ECP

Load: radial high; no axial loadCylindrical roller NU

Bearing SKF NU 206 ECP

€20.52per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
2 exact, 29 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
16 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C0
36.5 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
01

Equivalents

the same size 30 × 62 × 16 from other brands

36 products
Photo: NU 206 ECP
You are viewingSKF NU 206 ECP
€20.52baseline for the price comparison

Size and design match across the brand catalogues. The codes in the number are read against the SKF catalogue.

  • Photo: NU 206 ECPNU 206 ECPThis bearingSKF30 × 62 × 16available to order€20.52you are here
  • Photo: NU 206 ECPNU 206 ECPUTL30 × 62 × 16available to order€18.20−€2.32Request a quote

Under the price: the difference from the price of this bearing (€20.52).
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 30 × 62 × 16mm
C0static 36.5kN

Cylindrical roller NU bearing NU 206 ECP.

C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 206 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet