+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NJ320 ECJ: ⌀100 × ⌀215 × 47 mm⌀215⌀10047NJ320 ECJ
Fig. 1: NJ320 ECJ, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 320 ECJ

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing SKF NJ 320 ECJ

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 21 approximate
d
100 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
215 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
47 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 100 × 215 × 47 from other brands

22 products
Cross-section drawing to size: Cylindrical roller NJ, 100 × 215 × 47 mm
You are viewingSKF NJ 320 ECJ

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): NU 320 ENU 320 EECT100 × 215 × 4720 pcs€26.86Request a quote
  • Cross-section drawing to size: Cylindrical roller N, 100 × 215 × 47 mmN 320different designCT100 × 215 × 47available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NJ 320 EMNJ 320 EME, MCT100 × 215 × 47available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 100 × 215 × 47 mmNJ320MMCT100 × 215 × 47available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 100 × 215 × 47 mmNU320 MMCT100 × 215 × 47available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NUP320 EMC4NANUP320 EMC4NAclearance NA, ECT100 × 215 × 47available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 100 × 215 × 47 mmN320EME, MDYZV100 × 215 × 47available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 100 × 215 × 47 mmN 320 E M1 C3clearance C3, E, M1FAG100 × 215 × 47available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 100 × 215 × 47 mmN320 -E-XL-M1E, M1, XLFAG100 × 215 × 47available to orderon requestRequest a quote
  • Type diagram, no dimensions: rollerNJ 320 E-XL-M1-F1-C4clearance C4, E, M1, XL, F1: not decodedFAG100 × 215 × ?available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 100 × 215 × 47mm

Cylindrical roller NJ bearing NJ320 ECJ.

Frequently asked questions

Will 320 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet