+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NJ 330 ECMA/C3: ⌀150 × ⌀320 × 65 mm⌀320⌀15065NJ 330 ECMA/C3
Fig. 1: NJ 330 ECMA/C3, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 330 ECMA/C3

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing SKF NJ 330 ECMA/C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 16 approximate
d
150 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
320 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
65 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
C3
C
900 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 150 × 320 × 65 from other brands

17 products
Cross-section drawing to size: Cylindrical roller NJ, 150 × 320 × 65 mm
You are viewingSKF NJ 330 ECMA/C3

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller NU, 150 × 320 × 65 mmNU330M PQM, PQ: not decodedNTE150 × 320 × 654 pcs€349.40Request a quote
  • Series illustration (not a photo of this item): NJ330 EMC4NANJ330 EMC4NAclearance NA, ECT150 × 320 × 65available to orderon requestRequest a quote
  • Type diagram, no dimensions: rollerNJ330 EMC4NA+HJ330clearance NA, E, HJ330: not decodedCT150 × 320 × ?available to orderon requestRequest a quote
  • Type diagram, no dimensions: rollerNJ330ENA+HJ330clearance NA, E, HJ330: not decodedCT150 × 320 × ?available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 150 × 320 × 65 mmNJ330Mnormal clearance, MCT150 × 320 × 65available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 150 × 320 × 65 mmNU 330 Mnormal clearance, MCT150 × 320 × 65available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU330 EMC4NANU330 EMC4NAclearance NA, ECT150 × 320 × 65available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 150 × 320 × 65 mmNU 330 E M1normal clearance, E, M1FAG150 × 320 × 65available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 150 × 320 × 65 mmNU 330 E M1 C3E, M1FAG150 × 320 × 65available to orderon requestRequest a quote
  • Type diagram, no dimensions: rollerNU 330 E-XL-M1-F1-C4clearance C4, E, M1, XL, F1: not decodedFAG150 × 320 × ?available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 150 × 320 × 65mm
Cdynamic 900kN

Cylindrical roller NJ bearing NJ 330 ECMA/C3.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet