+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NJ 2313 ECP: ⌀65 × ⌀140 × 48 mm⌀140⌀6548NJ 2313 ECP
Fig. 1: NJ 2313 ECP, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 2313 ECP

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing SKF NJ 2313 ECP

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 9 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
48 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 65 × 140 × 48 from other brands

10 products
Cross-section drawing to size: Cylindrical roller NJ, 65 × 140 × 48 mm
You are viewingSKF NJ 2313 ECP

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller NU, 65 × 140 × 48 mmNU2313EC3clearance C3, ECT65 × 140 × 48available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 65 × 140 × 48 mmN2313EKME, M, 1:12 tapered boreDYZV65 × 140 × 48available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 65 × 140 × 48 mmNJ 2313 E-XL-TVP2-C4clearance C4, E, TVP2, XLFAG65 × 140 × 48available to orderon requestRequest a quote
  • Type diagram, no dimensions: rollerNJ 2313 E-XL-TVP2-QP51-C4clearance C4, E, TVP2, XL, QP51: not decodedFAG65 × 140 × ?available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 65 × 140 × 48 mmNU 2313 E-XL-K-TVP2 C3clearance C3, E, TVP2, XL, 1:12 tapered boreFAG65 × 140 × 48available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 65 × 140 × 48 mmNU 2313 E XL M1A C4clearance C4, E, M1A, XLFAG65 × 140 × 48available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 65 × 140 × 48 mmNJ 2313 ECP C4clearance C4, EC, PISB65 × 140 × 48available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 65 × 140 × 48 mmNU 2313 ECreinforced design ECSKF65 × 140 × 48out of stockon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 65 × 140 × 48 mmNJ 2313 ECP/C3clearance C3SKF65 × 140 × 48available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 65 × 140 × 48mm

Cylindrical roller NJ bearing NJ 2313 ECP.

Frequently asked questions

Will 2313 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet