+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of NJ 222 ECJ: ⌀110 × ⌀200 × 38 mm⌀200⌀11038NJ 222 ECJ
Fig. 1: NJ 222 ECJ, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of NJ 222 ECJ

Load: radial high; axial low, on one sideCylindrical roller NJ

Bearing SKF NJ 222 ECJ

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 19 approximate
d
110 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
200 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
38 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 110 × 200 × 38 from other brands

20 products
Cross-section drawing to size: Cylindrical roller NJ, 110 × 200 × 38 mm
You are viewingSKF NJ 222 ECJ

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Cylindrical roller N, 110 × 200 × 38 mmN 222different designCT110 × 200 × 38available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 110 × 200 × 38 mmNU222different designCT110 × 200 × 38available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 110 × 200 × 38 mmN 222 E-XL-M1E, M1, XLFAG110 × 200 × 38available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 110 × 200 × 38 mmNU 222 E-XL-M1-C3clearance C3, E, M1, XLFAG110 × 200 × 38available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 110 × 200 × 38 mmNU 222 EM1E, M1FAG110 × 200 × 38available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NU, 110 × 200 × 38 mmNU 222different designKoyo110 × 200 × 38available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NUP, 110 × 200 × 38 mmNUP 222 ECPEC, PNIS110 × 200 × 38available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): NU222ENU222EENTE110 × 200 × 38available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller N, 110 × 200 × 38 mmN 222 ECPreinforced design EC, PSKF110 × 200 × 38available to orderon requestRequest a quote
  • Cross-section drawing to size: Cylindrical roller NJ, 110 × 200 × 38 mmNJ 222 ECMreinforced design EC, different cageSKF110 × 200 × 38available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 110 × 200 × 38mm

Cylindrical roller NJ bearing NJ 222 ECJ.

Frequently asked questions

Will 222 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet