+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of HK 1012 RS: ⌀10 × ⌀14 × 12 mm⌀14⌀1012HK 1012 RSRS
Fig. 1: HK 1012 RS, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of HK 1012-RS

Load: radial high; no axial loadNeedle

Bearing SKF HK 1012-RS

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 0 approximate
d
10 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
14 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
12 mm
Width BRing width. Source: supplier data
Outer ring width C
12 mm
Outer ring width CWidth of the outer ring. Source: supplier data
Seal
RSrubber, one side
Clearance
normal clearance
C
4.29 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 10 × 14 × 12 from other brands

4 products
Cross-section drawing to size: Needle, 10 × 14 × 12 mm
You are viewingSKF HK 1012-RS

Not enough data for a firm conclusion: what is missing is written in the row.

  • Cross-section drawing to size: Needle, 10 × 14 × 12 mmHK 1012seal not specifiedCT10 × 14 × 12590 pcs€0.20Request a quote
  • Cross-section drawing to size: Needle, 10 × 14 × 12 mmHK 1012seal not specifiedno brand10 × 14 × 12available to orderon requestRequest a quote
  • Cross-section drawing to size: Needle, 10 × 14 × 12 mmHK 1012seal not specifiedINA10 × 14 × 12available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 10 × 14 × 12mm
Cdynamic 4.29kN

Needle bearing HK 1012 RS, design RS: contact seal on one side.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet