+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 7008 CDGA/P4A: ⌀40 × ⌀68 × 15 mm⌀68⌀40157008 CDGA/P4A
Fig. 1: 7008 CDGA/P4A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 7008 CDGA/P4A

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing SKF 7008 CDGA/P4A

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 4 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
68 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
15 mm
Width BRing width. Source: supplier data
Seal
open, no protection
C
15.9 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 40 × 68 × 15 from other brands

9 products
Cross-section drawing to size: Angular contact ball, 40 × 68 × 15 mm
You are viewingSKF 7008 CDGA/P4A

Everything the number specifies matches: series 70, 40 × 68 × 15 mm, open, no protection, C, precision class P4A, special design. The codes in the number are read against the SKF catalogue.

  • Cross-section drawing to size: Angular contact ball, 40 × 68 × 15 mm7008 CDGA/P4AThis bearingSKF40 × 68 × 15available to orderon requestyou are here
  • Cross-section drawing to size: Angular contact ball, 40 × 68 × 15 mm7008 CD/P4ASKF40 × 68 × 15available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 68d 40B 15
d×D×Bsize 40 × 68 × 15mm
Cdynamic 15.9kN

Angular contact ball bearing 7008.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet