+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6408 N: ⌀40 × ⌀110 × 27 mm⌀110⌀40276408 N
Fig. 1: 6408 N, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6408 N

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6408 N

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
3 exact, 8 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
27 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 40 × 110 × 27 from other brands

11 products
Cross-section drawing to size: Deep groove ball, 40 × 110 × 27 mm
You are viewingSKF 6408 N

Everything the number specifies matches: series 64, 40 × 110 × 27 mm, open, no protection, N, normal clearance, special design. The codes in the number are read against the SKF catalogue.

  • Cross-section drawing to size: Deep groove ball, 40 × 110 × 27 mm6408 NThis bearingSKF40 × 110 × 27available to orderon requestyou are here
  • Cross-section drawing to size: Deep groove ball, 40 × 110 × 27 mm6408 NCT40 × 110 × 2740 pcs€3.80Request a quote
  • Cross-section drawing to size: Deep groove ball, 40 × 110 × 27 mm6408 NKG40 × 110 × 27available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 110d 40B 27
d×D×Bsize 40 × 110 × 27mm

Deep groove ball bearing 6408. Under GOST the same bearing is designated 408.

Frequently asked questions

What is 408?

It is the same bearing under GOST 3189-89: 408 corresponds to the ISO base 6408. Size 40 × 110 × 27 mm, a full equivalent of 6408.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet