+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6322: ⌀110 × ⌀240 × 50 mm6322
Fig. 1: 6322, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6322

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6322

€312.32per piece
In stock: 2 pcs
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
5 exact, 12 approximate
d
110 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
240 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
50 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C
203 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
180 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
9.48 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 110 × 240 × 50 from other brands

18 products
Photo: 6322
You are viewingSKF 6322
€312.32baseline for the price comparison

Everything the number specifies matches: series 63, 110 × 240 × 50 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Photo: 63226322This bearingSKF110 × 240 × 502 pcs€312.32you are here
  • Series illustration (not a photo of this item): 63226322CT110 × 240 × 50available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 63226322DYZV110 × 240 × 50available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 63226322FAG110 × 240 × 50available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 63226322KG110 × 240 × 50available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€312.32).
02

Details

what this bearing is, questions

About the bearing

D 240d 110B 50
d×D×Bsize 110 × 240 × 50mm
Cdynamic 203kN
C0static 180kN
mweight 9.48kg

Deep groove ball bearing 6322. Under GOST the same bearing is designated 322.

C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 322?

It is the same bearing under GOST 3189-89: 322 corresponds to the ISO base 6322. Size 110 × 240 × 50 mm, a full equivalent of 6322.

Will 6322 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet