+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6319: ⌀95 × ⌀200 × 45 mm6319
Fig. 1: 6319, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6319

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6319

€120.60per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
3 exact, 17 approximate
d
95 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
200 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
45 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C0
118 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
5.75 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 95 × 200 × 45 from other brands

21 products
Photo: 6319
You are viewingSKF 6319
€120.60baseline for the price comparison

Everything the number specifies matches: series 63, 95 × 200 × 45 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Photo: 63196319This bearingSKF95 × 200 × 45available to order€120.60you are here
  • Series illustration (not a photo of this item): 63196319CT95 × 200 × 45available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 63196319KG95 × 200 × 45available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€120.60).
02

Details

what this bearing is, questions

About the bearing

D 200d 95B 45
d×D×Bsize 95 × 200 × 45mm
C0static 118kN
mweight 5.75kg

Deep groove ball bearing 6319.

C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 6319 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet