+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6318/C3: ⌀90 × ⌀190 × 43 mm6318/C3
Fig. 1: 6318/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6318/C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6318/C3

€99.55per piece
In stock: 14 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 20 approximate
d
90 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
190 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
43 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
C3
C0
108 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 90 × 190 × 43 from other brands

23 products
Photo: 6318/C3
You are viewingSKF 6318/C3
€99.55baseline for the price comparison

Everything the number specifies matches: series 63, 90 × 190 × 43 mm, open, no protection, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Photo: 6318/C36318/C3This bearingSKF90 × 190 × 4314 pcs€99.55you are here
  • Series illustration (not a photo of this item): 6318 C36318 C3CT90 × 190 × 43available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€99.55).
02

Details

what this bearing is, questions

About the bearing

D 190d 90B 43
d×D×Bsize 90 × 190 × 43mm
C0static 108kN

Deep groove ball bearing 6318 C3.

C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet