+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6316 C3: ⌀80 × ⌀170 × 39 mm6316 C3
Fig. 1: 6316 C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6316/C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6316/C3

€64.73per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
4 exact, 27 approximate
d
80 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
170 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
39 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
C3
C0
86.5 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
3.6 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 80 × 170 × 39 from other brands

32 products
Photo: 6316 C3
You are viewingSKF 6316/C3
€64.73baseline for the price comparison

Everything the number specifies matches: series 63, 80 × 170 × 39 mm, open, no protection, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

Under the price: the difference from the price of this bearing (€64.73).
02

Details

what this bearing is, questions

About the bearing

D 170d 80B 39
d×D×Bsize 80 × 170 × 39mm
C0static 86.5kN
mweight 3.6kg

Deep groove ball bearing 6316 C3.

C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet