+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6313: ⌀65 × ⌀140 × 33 mm6313
Fig. 1: 6313, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6313

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6313

€35.86per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
5 exact, 27 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
33 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C0
60 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 65 × 140 × 33 from other brands

34 products
Photo: 6313
You are viewingSKF 6313
€35.86baseline for the price comparison

Everything the number specifies matches: series 63, 65 × 140 × 33 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Photo: 63136313This bearingSKF65 × 140 × 33available to order€35.86you are here
  • Series illustration (not a photo of this item): 63136313NTE65 × 140 × 3350 pcs€10.24−€25.62Request a quote
  • Series illustration (not a photo of this item): 63136313CT65 × 140 × 33available to order€7.16−€28.70Request a quote
  • Series illustration (not a photo of this item): 63136313DYZV65 × 140 × 33available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 63136313KG65 × 140 × 33available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€35.86).
02

Details

what this bearing is, questions

About the bearing

D 140d 65B 33
d×D×Bsize 65 × 140 × 33mm
C0static 60kN

Deep groove ball bearing 6313. Under GOST the same bearing is designated 313.

C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 313?

It is the same bearing under GOST 3189-89: 313 corresponds to the ISO base 6313. Size 65 × 140 × 33 mm, a full equivalent of 6313.

Will 6313 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet