+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6313 2Z/C3: ⌀65 × ⌀140 × 33 mm6313 2Z/C32Z
Fig. 1: 6313 2Z/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6313-2Z/C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6313-2Z/C3

€45.01per piece
In stock: 20 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 32 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
33 mm
Width BRing width. Source: two supplier sources
Seal
2Zmetal shields on both sides
Clearance
C3
C
97.5 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
m
2.5 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 65 × 140 × 33 from other brands

34 products
Photo: 6313 2Z/C3
You are viewingSKF 6313-2Z/C3
€45.01baseline for the price comparison

Everything the number specifies matches: series 63, 65 × 140 × 33 mm, metal shields on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Photo: 6313 2Z/C36313 2Z/C3This bearingSKF65 × 140 × 3320 pcs€45.01you are here
  • Series illustration (not a photo of this item): 6313 ZZ C36313 ZZ C3NTE65 × 140 × 33available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€45.01).
02

Details

what this bearing is, questions

About the bearing

D 140d 65B 33
d×D×Bsize 65 × 140 × 33mm
Cdynamic 97.5kN
mweight 2.5kg

Deep groove ball bearing 6313-ZZ C3, design 2Z: metal shields on both sides.

C, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet