+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6312-2RS1/HC5C3WT: ⌀60 × ⌀130 × 31 mm6312-2RS1/HC5C3WT2RS1
Fig. 1: 6312-2RS1/HC5C3WT, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6312-2RS1/HC5C3WT

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6312-2RS1/HC5C3WT

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 44 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
31 mm
Width BRing width. Source: supplier data
Seal
2RS1contact seals on both sides
Clearance
C3
01

Equivalents

the same size 60 × 130 × 31 from other brands

46 products
Drawing: 6312-2RS1/HC5C3WT
You are viewingSKF 6312-2RS1/HC5C3WT

Everything the number specifies matches: series 63, 60 × 130 × 31 mm, contact seals on both sides, clearance C3, special design. The codes in the number are read against the SKF catalogue.

  • Drawing: 6312-2RS1/HC5C3WT6312-2RS1/HC5C3WTThis bearingSKF60 × 130 × 31available to orderon requestyou are here
  • Drawing: 6312 2RS1/C3WT6312 2RS1/C3WTSKF60 × 130 × 31available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 130d 60B 31
d×D×Bsize 60 × 130 × 31mm

Deep groove ball bearing 6312-2RS C3, design 2RS1: contact seals on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet