+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6307/C3: ⌀35 × ⌀80 × 21 mm6307/C3
Fig. 1: 6307/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6307/C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6307/C3

€7.21per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 65 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
21 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
C3
C
35.1 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
19 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
0.444 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 35 × 80 × 21 from other brands

68 products
Photo: 6307/C3
You are viewingSKF 6307/C3
€7.21baseline for the price comparison

Everything the number specifies matches: series 63, 35 × 80 × 21 mm, open, no protection, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Photo: 6307/C36307/C3This bearingSKF35 × 80 × 21available to order€7.21you are here
  • Photo: 6307 C36307 C3Z&S35 × 80 × 21out of stockon requestRequest a quote

Under the price: the difference from the price of this bearing (€7.21).
02

Details

what this bearing is, questions

About the bearing

D 80d 35B 21
d×D×Bsize 35 × 80 × 21mm
Cdynamic 35.1kN
C0static 19kN
mweight 0.444kg

Deep groove ball bearing 6307 C3.

C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet