+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6300-2RSH/C3: ⌀10 × ⌀35 × 11 mm6300-2RSH/C32RSH
Fig. 1: 6300-2RSH/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6300-2RSH/C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6300-2RSH/C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 23 approximate
d
10 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
35 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
11 mm
Width BRing width. Source: supplier data
Seal
2RSHcontact seals on both sides
Clearance
C3
C
8.52 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 10 × 35 × 11 from other brands

25 products
Series illustration (not a photo of this item): 6300-2RSH/C3
You are viewingSKF 6300-2RSH/C3

Everything the number specifies matches: series 63, 10 × 35 × 11 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Series illustration (not a photo of this item): 6300-2RSH/C36300-2RSH/C3This bearingSKF10 × 35 × 11available to orderon requestyou are here
  • Series illustration (not a photo of this item): 6300 2RSC36300 2RSC3KG10 × 35 × 11available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 35d 10B 11
d×D×Bsize 10 × 35 × 11mm
Cdynamic 8.52kN

Deep groove ball bearing 6300-2RS C3, design 2RSH: contact seals on both sides.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet