+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6222: ⌀110 × ⌀200 × 38 mm6222
Fig. 1: 6222, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6222

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6222

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
5 exact, 12 approximate
d
110 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
200 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
38 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
151 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 110 × 200 × 38 from other brands

17 products
Series illustration (not a photo of this item): 6222
You are viewingSKF 6222

Everything the number specifies matches: series 62, 110 × 200 × 38 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Series illustration (not a photo of this item): 62226222This bearingSKF110 × 200 × 38available to orderon requestyou are here
  • Series illustration (not a photo of this item): 62226222CT110 × 200 × 38283 pcs€17.70Request a quote
  • Series illustration (not a photo of this item): 62226222NTE110 × 200 × 3820 pcs€23.24Request a quote
  • Series illustration (not a photo of this item): 62226222DYZV110 × 200 × 38available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 62226222KG110 × 200 × 38available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 200d 110B 38
d×D×Bsize 110 × 200 × 38mm
Cdynamic 151kN

Deep groove ball bearing 6222. Under GOST the same bearing is designated 222.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 222?

It is the same bearing under GOST 3189-89: 222 corresponds to the ISO base 6222. Size 110 × 200 × 38 mm, a full equivalent of 6222.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet