Nothing found. Type a language or country name.
There is no photo of this product: the drawing shows the dimensions of 62207-2RS1
the same size 35 × 72 × 23 from other brands
14 products
Everything the number specifies matches: series 622, 35 × 72 × 23 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.
62207-2RS1This bearing
35 × 72 × 23available to orderon requestyou are here
62207 2RS
35 × 72 × 231,034 pcs€1.90Request a quote62207 2RS
35 × 72 × 2336 pcs€3.12Request a quote
62207 2RS
35 × 72 × 23available to order€4.68Request a quote62207 2RSno brand35 × 72 × 23available to orderon requestRequest a quote62207 2RSKG35 × 72 × 23available to orderon requestRequest a quotewhat this bearing is, questions
Deep groove ball bearing 62207-2RS, design 2RS1: contact seals on both sides.
2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.
Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.
Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.
Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.
Cookies
We use Google Analytics and Google Ads cookies to see which pages and searches work and to measure our ads. The site works the same without them. Cookie policy
