+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 62200-2RS1: ⌀10 × ⌀30 × 14 mm62200-2RS12RS1
Fig. 1: 62200-2RS1, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 62200-2RS1

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 62200-2RS1

€6.38per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
7 exact, 2 approximate
d
10 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
30 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
14 mm
Width BRing width. Source: two supplier sources
Seal
2RS1contact seals on both sides
Clearance
normal clearance
C
5.07 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
2.36 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.04 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 10 × 30 × 14 from other brands

9 products
Photo: 62200-2RS1
You are viewingSKF 62200-2RS1
€6.38baseline for the price comparison

Everything the number specifies matches: series 622, 10 × 30 × 14 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

Under the price: the difference from the price of this bearing (€6.38).
02

Details

what this bearing is, questions

About the bearing

D 30d 10B 14
d×D×Bsize 10 × 30 × 14mm
Cdynamic 5.07kN
C0static 2.36kN
mweight 0.04kg

Deep groove ball bearing 62200-2RS, design 2RS1: contact seals on both sides.

C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet