+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6220-2Z/C3: ⌀100 × ⌀180 × 34 mm6220-2Z/C32Z
Fig. 1: 6220-2Z/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6220-2Z/C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6220-2Z/C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 17 approximate
d
100 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
180 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
34 mm
Width BRing width. Source: supplier data
Seal
2Zmetal shields on both sides
Clearance
C3
01

Equivalents

the same size 100 × 180 × 34 from other brands

19 products
Series illustration (not a photo of this item): 6220-2Z/C3
You are viewingSKF 6220-2Z/C3

Everything the number specifies matches: series 62, 100 × 180 × 34 mm, metal shields on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Series illustration (not a photo of this item): 6220-2Z/C36220-2Z/C3This bearingSKF100 × 180 × 34available to orderon requestyou are here
  • Series illustration (not a photo of this item): 6220 2Z-C36220 2Z-C3FAG100 × 180 × 34available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 180d 100B 34
d×D×Bsize 100 × 180 × 34mm

Deep groove ball bearing 6220-ZZ C3, design 2Z: metal shields on both sides.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet