+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6215: ⌀75 × ⌀130 × 25 mm6215
Fig. 1: 6215, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm
Bearing SKF 6215 — photo 1
Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6215

€41.72per piece
In stock: 5 pcs
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
5 exact, 22 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
25 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
C0
49 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
01

Equivalents

the same size 75 × 130 × 25 from other brands

28 products
Photo: 6215
You are viewingSKF 6215
€41.72baseline for the price comparison

Everything the number specifies matches: series 62, 75 × 130 × 25 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

Under the price: the difference from the price of this bearing (€41.72).
02

Details

what this bearing is, questions

About the bearing

D 130d 75B 25
d×D×Bsize 75 × 130 × 25mm
C0static 49kN

Deep groove ball bearing 6215. Under GOST the same bearing is designated 215.

C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 215?

It is the same bearing under GOST 3189-89: 215 corresponds to the ISO base 6215. Size 75 × 130 × 25 mm, a full equivalent of 6215.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet