+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6210 Z: ⌀50 × ⌀90 × 20 mm⌀90⌀50206210 ZZ
Fig. 1: 6210 Z, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6210-Z

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6210-Z

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
3 exact, 73 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
90 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
20 mm
Width BRing width. Source: two supplier sources
Seal
Zshield, one side
Clearance
normal clearance
m
0.16 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 50 × 90 × 20 from other brands

77 products
Cross-section drawing to size: Deep groove ball, 50 × 90 × 20 mm
You are viewingSKF 6210-Z

Everything the number specifies matches: series 62, 50 × 90 × 20 mm, shield on one side, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Cross-section drawing to size: Deep groove ball, 50 × 90 × 20 mm6210 ZThis bearingSKF50 × 90 × 20out of stockon requestyou are here
  • Cross-section drawing to size: Deep groove ball, 50 × 90 × 20 mm6210 ZCT50 × 90 × 2010 pcs€1.86Request a quote
  • Cross-section drawing to size: Deep groove ball, 50 × 90 × 20 mm6210 ZKG50 × 90 × 20available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 90d 50B 20
d×D×Bsize 50 × 90 × 20mm
mweight 0.16kg

Deep groove ball bearing 6210-Z, design Z: shield on one side. Under GOST the same bearing is designated 60210.

M: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 60210?

It is the same bearing under GOST 3189-89: 6 — shield on one side, 0210 corresponds to the ISO base 6210. Size 50 × 90 × 20 mm, a full equivalent of 6210-Z.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet