+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6207 NR: ⌀35 × ⌀72 × 17 mm⌀72⌀35176207 NR
Fig. 1: 6207 NR, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6207 NR

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6207 NR

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
4 exact, 73 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
72 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
17 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 35 × 72 × 17 from other brands

77 products
Series illustration (not a photo of this item): 6207 NR
You are viewingSKF 6207 NR

Everything the number specifies matches: series 62, 35 × 72 × 17 mm, open, no protection, NR, normal clearance, special design. The codes in the number are read against the SKF catalogue.

  • Series illustration (not a photo of this item): 6207 NR6207 NRThis bearingSKF35 × 72 × 17available to orderon requestyou are here
  • Series illustration (not a photo of this item): 6207 NR6207 NRCT35 × 72 × 17available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6207 NR6207 NRKG35 × 72 × 17available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6207 NR6207 NRNTE35 × 72 × 17available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 72d 35B 17
d×D×Bsize 35 × 72 × 17mm

Deep groove ball bearing 6207. Under GOST the same bearing is designated 207.

Frequently asked questions

What is 207?

It is the same bearing under GOST 3189-89: 207 corresponds to the ISO base 6207. Size 35 × 72 × 17 mm, a full equivalent of 6207.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet