+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6206-2Z/C3: ⌀30 × ⌀62 × 16 mm6206-2Z/C32Z
Fig. 1: 6206-2Z/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6206-2Z/C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6206-2Z/C3

€4.36per piece
In stock: 113 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
5 exact, 85 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
16 mm
Width BRing width. Source: two supplier sources
Seal
2Zmetal shields on both sides
Clearance
C3
C
20.3 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
m
0.24 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 30 × 62 × 16 from other brands

90 products
Photo: 6206-2Z/C3
You are viewingSKF 6206-2Z/C3
€4.36baseline for the price comparison

Everything the number specifies matches: series 62, 30 × 62 × 16 mm, metal shields on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

Under the price: the difference from the price of this bearing (€4.36).
02

Details

what this bearing is, questions

About the bearing

D 62d 30B 16
d×D×Bsize 30 × 62 × 16mm
Cdynamic 20.3kN
mweight 0.24kg

Deep groove ball bearing 6206-ZZ C3, design 2Z: metal shields on both sides.

C, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet