+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6206-2RS1NR: ⌀30 × ⌀62 × 16 mm⌀62⌀30166206-2RS1NR2RS1
Fig. 1: 6206-2RS1NR, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6206-2RS1NR

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6206-2RS1NR

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 88 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
16 mm
Width BRing width. Source: supplier data
Seal
2RS1contact seals on both sides
Clearance
normal clearance
01

Equivalents

the same size 30 × 62 × 16 from other brands

90 products
Series illustration (not a photo of this item): 6206-2RS1NR
You are viewingSKF 6206-2RS1NR

Everything the number specifies matches: series 62, 30 × 62 × 16 mm, contact seals on both sides, NR, normal clearance, special design. The codes in the number are read against the SKF catalogue.

  • Series illustration (not a photo of this item): 6206-2RS1NR6206-2RS1NRThis bearingSKF30 × 62 × 16available to orderon requestyou are here
  • Series illustration (not a photo of this item): 6206 2NSE NR6206 2NSE NRNACHI30 × 62 × 1648 pcs€5.56Request a quote
02

Details

what this bearing is, questions

About the bearing

D 62d 30B 16
d×D×Bsize 30 × 62 × 16mm

Deep groove ball bearing 6206-2RS, design 2RS1: contact seals on both sides. Under GOST the same bearing is designated 180206.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 180206?

It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0206 corresponds to the ISO base 6206. Size 30 × 62 × 16 mm, a full equivalent of 6206-2RS.

Will 6206 2RS1 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet