+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6205-2RSH: ⌀25 × ⌀52 × 15 mm6205-2RSH2RSH
Fig. 1: 6205-2RSH, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6205-2RSH

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6205-2RSH

€3.47per piece
In stock: 353 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
11 exact, 69 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
52 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
15 mm
Width BRing width. Source: two supplier sources
Seal
2RSHcontact seals on both sides
Clearance
normal clearance
C0
7.8 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: two supplier sources
m
0.128 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 25 × 52 × 15 from other brands

84 products
Photo: 6205-2RSH
You are viewingSKF 6205-2RSH
€3.47baseline for the price comparison

Everything the number specifies matches: series 62, 25 × 52 × 15 mm, contact seals on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

Under the price: the difference from the price of this bearing (€3.47).
02

Details

what this bearing is, questions

About the bearing

D 52d 25B 15
d×D×Bsize 25 × 52 × 15mm
C0static 7.8kN
mweight 0.128kg

Deep groove ball bearing 6205-2RS, design 2RSH: contact seals on both sides. Under GOST the same bearing is designated 180205.

C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 180205?

It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0205 corresponds to the ISO base 6205. Size 25 × 52 × 15 mm, a full equivalent of 6205-2RS.

Will 6205 2RSH C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet