+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 62/22-2RS1: ⌀22 × ⌀50 × 14 mm62/22-2RS12RS1
Fig. 1: 62/22-2RS1, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 62/22-2RS1

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 62/22-2RS1

€7.68per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 3 approximate
d
22 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
50 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
14 mm
Width BRing width. Source: supplier data
Seal
2RS1contact seals on both sides
Clearance
normal clearance
C0
7.65 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.12 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 22 × 50 × 14 from other brands

5 products
Photo: 62/22-2RS1
You are viewingSKF 62/22-2RS1
€7.68baseline for the price comparison

Same size, different design: the difference is written in the row.

Under the price: the difference from the price of this bearing (€7.68).
02

Details

what this bearing is, questions

About the bearing

D 50d 22B 14
d×D×Bsize 22 × 50 × 14mm
C0static 7.65kN
mweight 0.12kg

Deep groove ball bearing 62/22-2RS, design 2RS1: contact seals on both sides.

C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Will 62/22 2RS1 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet