+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 619/4-2Z: ⌀4 × ⌀11 × 4 mm619/4-2Z2Z
Fig. 1: 619/4-2Z, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 619/4-2Z

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 619/4-2Z

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
4 exact, 0 approximate
d
4 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
11 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
4 mm
Width BRing width. Source: supplier data
Seal
2Zmetal shields on both sides
Clearance
normal clearance
C
0.624 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 4 × 11 × 4 from other brands

4 products
Series illustration (not a photo of this item): 619/4-2Z
You are viewingSKF 619/4-2Z

Everything the number specifies matches: series 619, 4 × 11 × 4 mm, metal shields on both sides, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.
02

Details

what this bearing is, questions

About the bearing

D 11d 4B 4
d×D×Bsize 4 × 11 × 4mm
Cdynamic 0.624kN

Deep groove ball bearing 619/4-ZZ, design 2Z: metal shields on both sides.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet