+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 61815 C3: ⌀75 × ⌀95 × 10 mm61815 C3
Fig. 1: 61815 C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 61815/C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 61815/C3

€79.29per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 4 approximate
d
75 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
95 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
10 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
C3
C
12.5 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
C0
10.8 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
01

Equivalents

the same size 75 × 95 × 10 from other brands

5 products
Photo: 61815 C3
You are viewingSKF 61815/C3
€79.29baseline for the price comparison

Same size, different design: the difference is written in the row.

Under the price: the difference from the price of this bearing (€79.29).
02

Details

what this bearing is, questions

About the bearing

D 95d 75B 10
d×D×Bsize 75 × 95 × 10mm
Cdynamic 12.5kN
C0static 10.8kN

Deep groove ball bearing 61815 C3.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet