+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6021: ⌀105 × ⌀160 × 26 mm6021
Fig. 1: 6021, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6021

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6021

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
2 exact, 4 approximate
d
105 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
26 mm
Width BRing width. Source: two supplier sources
Seal
open, no protection
Clearance
normal clearance
m
1.6 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 105 × 160 × 26 from other brands

9 products
Series illustration (not a photo of this item): 6021
You are viewingSKF 6021

Everything the number specifies matches: series 60, 105 × 160 × 26 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Series illustration (not a photo of this item): 60216021This bearingSKF105 × 160 × 26out of stockon requestyou are here
  • Series illustration (not a photo of this item): 60216021CT105 × 160 × 2620 pcson requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 160d 105B 26
d×D×Bsize 105 × 160 × 26mm
mweight 1.6kg

Deep groove ball bearing 6021. Under GOST the same bearing is designated 121.

M: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 121?

It is the same bearing under GOST 3189-89: 121 corresponds to the ISO base 6021. Size 105 × 160 × 26 mm, a full equivalent of 6021.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet