+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6018 2RS1/C3: ⌀90 × ⌀140 × 24 mm6018 2RS1/C32RS1
Fig. 1: 6018 2RS1/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6018-2RS1/C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6018-2RS1/C3

€44.29per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 17 approximate
d
90 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
140 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
24 mm
Width BRing width. Source: two supplier sources
Seal
2RS1contact seals on both sides
Clearance
C3
C
60.5 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 90 × 140 × 24 from other brands

18 products
Photo: 6018 2RS1/C3
You are viewingSKF 6018-2RS1/C3
€44.29baseline for the price comparison

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 60186018open, no protection, normal clearanceCT90 × 140 × 2484 pcs€4.45−€39.84Request a quote
  • Photo: 60186018open, no protection, normal clearanceFLT90 × 140 × 24available to order€27.25−€17.04Request a quote
  • Photo: 60186018open, no protection, normal clearanceSKF90 × 140 × 24available to order€45.55+€1.26Request a quote
  • Series illustration (not a photo of this item): 60186018open, no protection, normal clearanceDYZV90 × 140 × 24available to orderon requestRequest a quote
  • Drawing: 6018 M C46018 M C4open, no protection, clearance C4, MFAG90 × 140 × 24available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 60186018open, no protection, normal clearanceKG90 × 140 × 24available to orderon requestRequest a quote
  • Drawing: 6018CM 56018CM 5open, no protection, clearance CM, 5NSK90 × 140 × 24available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 6018 ZZ6018 ZZmetal shields on both sides, normal clearanceCT90 × 140 × 2450 pcs€7.52−€36.77Request a quote
  • Series illustration (not a photo of this item): 6018 ZZ6018 ZZmetal shields on both sides, normal clearanceNTE90 × 140 × 242 pcs€8.21−€36.08Request a quote
  • Series illustration (not a photo of this item): 6018 ZZ6018 ZZmetal shields on both sides, normal clearanceno brand90 × 140 × 24available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€44.29).
02

Details

what this bearing is, questions

About the bearing

D 140d 90B 24
d×D×Bsize 90 × 140 × 24mm
Cdynamic 60.5kN

Deep groove ball bearing 6018-2RS C3, design 2RS1: contact seals on both sides.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet