+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 6016-2Z/C3: ⌀80 × ⌀125 × 22 mm6016-2Z/C32Z
Fig. 1: 6016-2Z/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6016-2Z/C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6016-2Z/C3

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 24 approximate
d
80 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
125 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
22 mm
Width BRing width. Source: supplier data
Seal
2Zmetal shields on both sides
Clearance
C3
C
49.4 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 80 × 125 × 22 from other brands

25 products
Series illustration (not a photo of this item): 6016-2Z/C3
You are viewingSKF 6016-2Z/C3

Same size, different design: the difference is written in the row.

  • Photo: 6016-2RS16016-2RS1contact seals on both sides, normal clearanceSKF80 × 125 × 2234 pcs€32.36Request a quote
  • Series illustration (not a photo of this item): 6016 2RS6016 2RScontact seals on both sides, normal clearanceCT80 × 125 × 22available to order€3.95Request a quote
  • Photo: 6016 2RS6016 2RScontact seals on both sides, normal clearanceZ&S80 × 125 × 22available to order€10.35Request a quote
  • Series illustration (not a photo of this item): 6016-2RS1/C36016-2RS1/C3contact seals on both sidesSKF80 × 125 × 22available to order€32.10Request a quote
  • Photo: 6016 2RS6016 2RScontact seals on both sides, normal clearanceTIMKEN80 × 125 × 22available to order€54.31Request a quote
  • Series illustration (not a photo of this item): 6016 2RS6016 2RScontact seals on both sides, normal clearanceno brand80 × 125 × 22available to orderon requestRequest a quote
  • Type diagram, no dimensions: ball6016DDUC3E & AS2SXcontact seals on both sides, AS2S, E, X, &: not decodedNSK80 × 125 × ?available to orderon requestRequest a quote
  • Type diagram, no dimensions: ball6016DDUCM & NS7SXcontact seals on both sides, clearance CM, NS7S, X, &: not decodedNSK80 × 125 × ?available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 60166016open, no protection, normal clearanceCT80 × 125 × 2232 pcs€4.48Request a quote
  • Series illustration (not a photo of this item): 60166016open, no protection, normal clearanceNTE80 × 125 × 22available to order€6Request a quote
02

Details

what this bearing is, questions

About the bearing

D 125d 80B 22
d×D×Bsize 80 × 125 × 22mm
Cdynamic 49.4kN

Deep groove ball bearing 6016-ZZ C3, design 2Z: metal shields on both sides.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet