+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6012: ⌀60 × ⌀95 × 18 mm6012
Fig. 1: 6012, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6012

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6012

€11.35per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
4 exact, 26 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
95 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
18 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
30.7 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
23.2 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
01

Equivalents

the same size 60 × 95 × 18 from other brands

31 products
Photo: 6012
You are viewingSKF 6012
€11.35baseline for the price comparison

Everything the number specifies matches: series 60, 60 × 95 × 18 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Photo: 60126012This bearingSKF60 × 95 × 18available to order€11.35you are here
  • Series illustration (not a photo of this item): 60126012CT60 × 95 × 18184 pcs€1.68−€9.67Request a quote
  • Series illustration (not a photo of this item): 60126012KG60 × 95 × 18available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 60126012NTE60 × 95 × 18available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€11.35).
02

Details

what this bearing is, questions

About the bearing

D 95d 60B 18
d×D×Bsize 60 × 95 × 18mm
Cdynamic 30.7kN
C0static 23.2kN

Deep groove ball bearing 6012. Under GOST the same bearing is designated 112.

C, C₀: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 112?

It is the same bearing under GOST 3189-89: 112 corresponds to the ISO base 6012. Size 60 × 95 × 18 mm, a full equivalent of 6012.

Will 6012 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet