+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6009-2RS1/C3: ⌀45 × ⌀75 × 16 mm6009-2RS1/C32RS1
Fig. 1: 6009-2RS1/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6009-2RS1/C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6009-2RS1/C3

€8.70per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
4 exact, 44 approximate
d
45 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
75 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
16 mm
Width BRing width. Source: two supplier sources
Seal
2RS1contact seals on both sides
Clearance
C3
C
22.1 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
14.6 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.25 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 45 × 75 × 16 from other brands

48 products
Series illustration (not a photo of this item): 6009-2RS1/C3
You are viewingSKF 6009-2RS1/C3
€8.70baseline for the price comparison

Everything the number specifies matches: series 60, 45 × 75 × 16 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

Under the price: the difference from the price of this bearing (€8.70).
02

Details

what this bearing is, questions

About the bearing

D 75d 45B 16
d×D×Bsize 45 × 75 × 16mm
Cdynamic 22.1kN
C0static 14.6kN
mweight 0.25kg

Deep groove ball bearing 6009-2RS C3, design 2RS1: contact seals on both sides.

C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet