+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 6008-2RS1/C3: ⌀40 × ⌀68 × 15 mm6008-2RS1/C32RS1
Fig. 1: 6008-2RS1/C3, end view and section; rolling element geometry per the NSK catalogue. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6008-2RS1/C3

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6008-2RS1/C3

€6.70per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
4 exact, 47 approximate
d
40 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
68 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
15 mm
Width BRing width. Source: two supplier sources
Seal
2RS1contact seals on both sides
Clearance
C3
C
17.8 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
11 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.2 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 40 × 68 × 15 from other brands

51 products
Series illustration (not a photo of this item): 6008-2RS1/C3
You are viewingSKF 6008-2RS1/C3
€6.70baseline for the price comparison

Everything the number specifies matches: series 60, 40 × 68 × 15 mm, contact seals on both sides, clearance C3, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

Under the price: the difference from the price of this bearing (€6.70).
02

Details

what this bearing is, questions

About the bearing

D 68d 40B 15
d×D×Bsize 40 × 68 × 15mm
Cdynamic 17.8kN
C0static 11kN
mweight 0.2kg

Deep groove ball bearing 6008-2RS C3, design 2RS1: contact seals on both sides.

C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet