+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Simplified drawing of the bearing per ISO 8826-1, dimensions of 6007-2RS1NR: ⌀35 × ⌀62 × 14 mm⌀62⌀35146007-2RS1NR2RS1
Fig. 1: 6007-2RS1NR, simplified drawing per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 6007-2RS1NR

Load: radial medium; axial low, on both sidesDeep groove ball

Bearing SKF 6007-2RS1NR

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
GOST number
Equivalents
2 exact, 53 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
14 mm
Width BRing width. Source: supplier data
Seal
2RS1contact seals on both sides
Clearance
normal clearance
01

Equivalents

the same size 35 × 62 × 14 from other brands

55 products
Series illustration (not a photo of this item): 6007-2RS1NR
You are viewingSKF 6007-2RS1NR

Everything the number specifies matches: series 60, 35 × 62 × 14 mm, contact seals on both sides, NR, normal clearance, special design. The codes in the number are read against the SKF catalogue.

  • Series illustration (not a photo of this item): 6007-2RS1NR6007-2RS1NRThis bearingSKF35 × 62 × 14available to orderon requestyou are here
  • Series illustration (not a photo of this item): 6007 2RS NR6007 2RS NRKoyo35 × 62 × 14available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 62d 35B 14
d×D×Bsize 35 × 62 × 14mm

Deep groove ball bearing 6007-2RS, design 2RS1: contact seals on both sides. Under GOST the same bearing is designated 180107.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

What is 180107?

It is the same bearing under GOST 3189-89: 18 — contact seals on both sides, 0107 corresponds to the ISO base 6007. Size 35 × 62 × 14 mm, a full equivalent of 6007-2RS.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet