+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 3312 A: ⌀60 × ⌀130 × 54 mm⌀130⌀60543312 A
Fig. 1: 3312 A, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 3312 A

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing SKF 3312 A

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 6 approximate
d
60 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
130 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
54 mm
Width BRing width. Source: supplier data
Seal
open, no protection
C
127 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 60 × 130 × 54 from other brands

7 products
Cross-section drawing to size: Angular contact ball, 60 × 130 × 54 mm
You are viewingSKF 3312 A

Same size, different design: the difference is written in the row.

  • Cross-section drawing to size: Angular contact ball, 60 × 130 × 54 mm3312B-2RSRTNGcontact seals on both sides, B, TNGNEUWEG60 × 130 × 54available to orderon requestRequest a quote
  • Type diagram, no dimensions: ball3312B-2RSRTNG N AR3N5contact seals on both sides, 5, A, B, TNG, groove for a snap ring, R3: not decodedNSK60 × 130 × ?available to orderon requestRequest a quote
  • Cross-section drawing to size: Angular contact ball, 60 × 130 × 54 mm3312 B 2ZRTNG C3metal shields on both sides, clearance C3, B, TNGNSK60 × 130 × 54available to orderon requestRequest a quote
  • Cross-section drawing to size: Angular contact ball, 60 × 130 × 54 mm3312 A-2Z/C3MT33metal shields on both sides, clearance C3, A, MT33SKF60 × 130 × 54available to orderon requestRequest a quote
  • Photo: 33123312standard designNEU60 × 130 × 54out of stockon requestRequest a quote
  • Type diagram, no dimensions: ball3312 AJC3clearance C3, J: not decodedTIMKEN60 × 130 × ?available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 130d 60B 54
d×D×Bsize 60 × 130 × 54mm
Cdynamic 127kN

Angular contact ball bearing 3312 A.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 3312 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet