+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 3307 ATN9: ⌀35 × ⌀80 × 34.9 mm⌀80⌀3534.93307 ATN9
Fig. 1: 3307 ATN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 3307 ATN9

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing SKF 3307 ATN9

€46.38per piece
In stock: 50 pcs
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 29 approximate
d
35 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
80 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
34.9 mm
Width BRing width. Source: supplier data
Seal
open, no protection
01

Equivalents

the same size 35 × 80 × 34.9 from other brands

32 products
Photo: 3307 ATN9
You are viewingSKF 3307 ATN9
€46.38baseline for the price comparison

Everything the number specifies matches: series 33, 35 × 80 × 34.9 mm, open, no protection, special design; any contact angle. The codes in the number are read against the SKF catalogue.

  • Photo: 3307 ATN93307 ATN9This bearingSKF35 × 80 × 34.950 pcs€46.38you are here
  • Cross-section drawing to size: Angular contact ball, 35 × 80 × 34.9 mm3307 ANTE35 × 80 × 34.9available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€46.38).
02

Details

what this bearing is, questions

About the bearing

D 80d 35B 34.9
d×D×Bsize 35 × 80 × 34.9mm

Angular contact ball bearing 3307 A.

Frequently asked questions

Will 3307 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet