+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 3218: ⌀90 × ⌀160 × 52.4 mm⌀160⌀9052.43218
Fig. 1: 3218, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 3218

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing SKF 3218

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
2 exact, 0 approximate
d
90 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
160 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
52.4 mm
Width BRing width. Source: supplier data
Seal
open, no protection
m
4.15 kg
MassWeight of the product. Source: supplier data
01

Equivalents

the same size 90 × 160 × 52.4 from other brands

2 products
Series illustration (not a photo of this item): 3218
You are viewingSKF 3218

Everything the number specifies matches: series 32, 90 × 160 × 52.4 mm, open, no protection, ordinary steel, design without special letters; any contact angle. The codes in the number are read against the SKF catalogue.

  • Series illustration (not a photo of this item): 32183218This bearingSKF90 × 160 × 52.4out of stockon requestyou are here
  • Series illustration (not a photo of this item): 32183218NTN/SNR90 × 160 × 52.4available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 160d 90B 52.4
d×D×Bsize 90 × 160 × 52.4mm
mweight 4.15kg

Angular contact ball bearing 3218. Under GOST the same bearing is designated 3056218.

M: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 3056218?

It is the same bearing under GOST 3189-89: 3056218 corresponds to the ISO base 3218. Size 90 × 160 × 52.4 mm, a full equivalent of 3218.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet