+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 3213 A-2RS1/C3MT33: ⌀65 × ⌀120 × 38.1 mm⌀120⌀6538.13213 A-2RS1/C3MT332RS1
Fig. 1: 3213 A-2RS1/C3MT33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 3213 A-2RS1/C3MT33

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing SKF 3213 A-2RS1/C3MT33

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 7 approximate
d
65 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
120 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
38.1 mm
Width BRing width. Source: supplier data
Seal
2RS1contact seals on both sides
Clearance
C3
C
80.6 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 65 × 120 × 38.1 from other brands

8 products
Cross-section drawing to size: Angular contact ball, 65 × 120 × 38.1 mm
You are viewingSKF 3213 A-2RS1/C3MT33

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 3213 2RS3213 2RSnormal clearance, standard designCT65 × 120 × 38.1196 pcs€7.03Request a quote
  • Type diagram, no dimensions: ball3213 BD-XL-2HRSXL, BD: not decodedFAG65 × 120 × ?available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 3213 2RS3213 2RSnormal clearance, standard designINA65 × 120 × 38.1available to orderon requestRequest a quote
  • Cross-section drawing to size: Angular contact ball, 65 × 120 × 38.1 mm3213 B-2RSRTNGnormal clearance, B, TNGNSK65 × 120 × 38.1available to orderon requestRequest a quote
  • Photo: 3213 B.TVH3213 B.TVHopen, no protection, normal clearance, B, TVHFAG65 × 120 × 38.1available to order€98.73Request a quote
  • Series illustration (not a photo of this item): 32133213open, no protection, normal clearance, standard designSKF65 × 120 × 38.1out of stockon requestRequest a quote
  • Cross-section drawing to size: Angular contact ball, 65 × 120 × 38.1 mm3213 Aopen, no protection, normal clearance, ASKF65 × 120 × 38.1available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 120d 65B 38.1
d×D×Bsize 65 × 120 × 38.1mm
Cdynamic 80.6kN

Angular contact ball bearing 3213 A-2RS C3, design 2RS1: contact seals on both sides.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet