+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 3211 A 2 RS1/MT 33: ⌀55 × ⌀100 mm⌀100⌀553211 A 2 RS1/MT 332RS1
Fig. 1: 3211 A 2 RS1/MT 33, end view and section; internal parts simplified per ISO 8826-1; width not specified — outline drawn to the proportions of the type. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 3211 A 2 RS1/MT 33

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing SKF 3211 A 2 RS1/MT 33

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
Equivalents
1 exact, 0 approximate
d
55 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
100 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
Seal
2RS1contact seals on both sides
C
60 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 55 × 100 from other brands

9 products
Type diagram, no dimensions: ball
You are viewingSKF 3211 A 2 RS1/MT 33

Not enough data for a firm conclusion: what is missing is written in the row.
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 55 × 100mm
Cdynamic 60kN

Angular contact ball bearing 3211 A 2 RS1/MT 33, design 2RS1: contact seals on both sides.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet