+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 3206 ATN9: ⌀30 × ⌀62 × 23.8 mm⌀62⌀3023.83206 ATN9
Fig. 1: 3206 ATN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 3206 ATN9

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing SKF 3206 ATN9

€25.80per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 35 approximate
d
30 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
62 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
23.8 mm
Width BRing width. Source: supplier data
Seal
open, no protection
C
30 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
C0
20.4 kN
Basic static load rating C0Permissible load without rotation and under shock; ISO 76 method, manufacturer’s figure. Source: supplier data
m
0.29 kg
MassWeight of the product. Source: two supplier sources
01

Equivalents

the same size 30 × 62 × 23.8 from other brands

38 products
Photo: 3206 ATN9
You are viewingSKF 3206 ATN9
€25.80baseline for the price comparison

Everything the number specifies matches: series 32, 30 × 62 × 23.8 mm, open, no protection, special design; any contact angle. The codes in the number are read against the SKF catalogue.

  • Photo: 3206 ATN93206 ATN9This bearingSKF30 × 62 × 23.8available to order€25.80you are here
  • Cross-section drawing to size: Angular contact ball, 30 × 62 × 23.8 mm3206 ASKF30 × 62 × 23.8available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€25.80).
02

Details

what this bearing is, questions

About the bearing

D 62d 30B 23.8
d×D×Bsize 30 × 62 × 23.8mm
Cdynamic 30kN
C0static 20.4kN
mweight 0.29kg

Angular contact ball bearing 3206 A.

C, C₀, m: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 3206 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet