+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Prices are in euros. The final price and delivery cost are confirmed in the quote.
Drawing of 3205 ATN9: ⌀25 × ⌀52 × 20.6 mm⌀52⌀2520.63205 ATN9
Fig. 1: 3205 ATN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 3205 ATN9

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing SKF 3205 ATN9

€25.96per piece
Available to orderThe manager confirms the lead time
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 33 approximate
d
25 mm
Bore diameter dBearing bore = shaft diameter. Source: two supplier sources
D
52 mm
Outside diameter DOutside diameter = housing bore. Source: two supplier sources
B
20.6 mm
Width BRing width. Source: supplier data
Seal
open, no protection
C
21.539 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: two supplier sources
01

Equivalents

the same size 25 × 52 × 20.6 from other brands

38 products
Photo: 3205 ATN9
You are viewingSKF 3205 ATN9
€25.96baseline for the price comparison

Everything the number specifies matches: series 32, 25 × 52 × 20.6 mm, open, no protection, special design; any contact angle. The codes in the number are read against the SKF catalogue.

  • Photo: 3205 ATN93205 ATN9This bearingSKF25 × 52 × 20.6available to order€25.96you are here
  • Cross-section drawing to size: Angular contact ball, 25 × 52 × 20.6 mm3205.ANTN/SNR25 × 52 × 20.6available to orderon requestRequest a quote

Under the price: the difference from the price of this bearing (€25.96).
02

Details

what this bearing is, questions

About the bearing

D 52d 25B 20.6
d×D×Bsize 25 × 52 × 20.6mm
Cdynamic 21.539kN

Angular contact ball bearing 3205 A.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet