+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 3201 ATN9: ⌀12 × ⌀32 × 15.9 mm⌀32⌀1215.93201 ATN9
Fig. 1: 3201 ATN9, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 3201 ATN9

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing SKF 3201 ATN9

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 11 approximate
d
12 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
32 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
15.9 mm
Width BRing width. Source: supplier data
Seal
open, no protection
C
10.1 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 12 × 32 × 15.9 from other brands

12 products
Series illustration (not a photo of this item): 3201 ATN9
You are viewingSKF 3201 ATN9

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 3201 2RS3201 2RScontact seals on both sides, standard designCT12 × 32 × 15.9918 pcs€1.08Request a quote
  • Series illustration (not a photo of this item): 3201 2RS3201 2RScontact seals on both sides, standard designNTE12 × 32 × 15.97 pcs€1.73Request a quote
  • Cross-section drawing to size: Angular contact ball, 12 × 32 × 15.9 mm3201 2RS TNGcontact seals on both sides, TNGCT12 × 32 × 15.9available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 3201 2RS3201 2RScontact seals on both sides, standard designKG12 × 32 × 15.9available to orderon requestRequest a quote
  • Cross-section drawing to size: Angular contact ball, 12 × 32 × 15.9 mm3201B-2RSRTNGcontact seals on both sides, B, TNGNEUWEG12 × 32 × 15.9available to orderon requestRequest a quote
  • Type diagram, no dimensions: ball3201B-2RSRTNG N YRLN5contact seals on both sides, 5, B, TNG, Y, groove for a snap ring, RL: not decodedNSK12 × 32 × ?available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 3201 A-2RS1TN9/MT333201 A-2RS1TN9/MT33contact seals on both sides, different cage, A, MT33SKF12 × 32 × 15.9available to orderon requestRequest a quote
  • Photo: 3201 2RS3201 2RScontact seals on both sides, standard designZ&S12 × 32 × 15.9out of stockon requestRequest a quote
  • Cross-section drawing to size: Angular contact ball, 12 × 32 × 15.9 mmS 3201 B 2RScontact seals on both sides, B, S: not decodedZEN12 × 32 × 15.9available to orderon requestRequest a quote
  • Photo: 32013201standard designFAG12 × 32 × 15.9available to order€20.57Request a quote
02

Details

what this bearing is, questions

About the bearing

D 32d 12B 15.9
d×D×Bsize 12 × 32 × 15.9mm
Cdynamic 10.1kN

Angular contact ball bearing 3201 A.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet