+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 3200 A-2ZTN9/MT33: ⌀10 × ⌀30 × 14 mm⌀30⌀10143200 A-2ZTN9/MT332Z
Fig. 1: 3200 A-2ZTN9/MT33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 3200 A-2ZTN9/MT33

Combined load at an angle (angular contact), axial on one sideAngular contact ball

Bearing SKF 3200 A-2ZTN9/MT33

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 8 approximate
d
10 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
30 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
14 mm
Width BRing width. Source: supplier data
Seal
2Zmetal shields on both sides
C
7.61 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 10 × 30 × 14 from other brands

10 products
Series illustration (not a photo of this item): 3200 A-2ZTN9/MT33
You are viewingSKF 3200 A-2ZTN9/MT33

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 3200 2RS3200 2RScontact seals on both sides, standard designCT10 × 30 × 14680 pcs€1.04Request a quote
  • Series illustration (not a photo of this item): 3200 2RS3200 2RScontact seals on both sides, standard designno brand10 × 30 × 14available to orderon requestRequest a quote
  • Cross-section drawing to size: Angular contact ball, 10 × 30 × 14 mm3200 BB-2RSR-TVHcontact seals on both sides, B, TVHFAG10 × 30 × 14available to orderon requestRequest a quote
  • Type diagram, no dimensions: ball3200B-2RSRTNG N YRLN5contact seals on both sides, 5, B, TNG, Y, groove for a snap ring, RL: not decodedNSK10 × 30 × ?available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 3200 A-2RS1TN9/MT333200 A-2RS1TN9/MT33contact seals on both sidesSKF10 × 30 × 14available to orderon requestRequest a quote
  • Cross-section drawing to size: Angular contact ball, 10 × 30 × 14 mm3200 ZZstandard designCT10 × 30 × 14164 pcs€1.07Request a quote
  • Type diagram, no dimensions: ball3200B-2ZRTNG N YRLN55, B, TNG, Y, groove for a snap ring, RL: not decodedNSK10 × 30 × ?available to orderon requestRequest a quote
  • Photo: 3200 ATN93200 ATN9open, no protection, different cage, ASKF10 × 30 × 14available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

D 30d 10B 14
d×D×Bsize 10 × 30 × 14mm
Cdynamic 7.61kN

Angular contact ball bearing 3200 A-ZZ, design 2Z: metal shields on both sides.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

How does 2RS differ from ZZ?

2RS has rubber seals that touch the inner ring and keep out dust and water better, which is the usual choice for field machinery. ZZ has metal shields that do not touch, allow higher speeds, and protect against dirt less well.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet