+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 23228 CC/W33: ⌀140 × ⌀250 × 88 mm⌀250⌀1408823228 CC/W33
Fig. 1: 23228 CC/W33, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 23228 CC/W33

Load: radial high; axial medium, on both sidesSpherical roller

Bearing SKF 23228 CC/W33

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
1 exact, 2 approximate
d
140 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
250 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
88 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
915 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 140 × 250 × 88 from other brands

3 products
Series illustration (not a photo of this item): 23228 CC/W33
You are viewingSKF 23228 CC/W33

Same size, different design: the difference is written in the row.

  • Series illustration (not a photo of this item): 23228 CC/C3W3323228 CC/C3W33clearance C3SKF140 × 250 × 88available to orderon requestRequest a quote
  • Cross-section drawing to size: Spherical roller, 140 × 250 × 88 mm23228 CKW33C, lubrication groove and holes, 1:12 tapered boreURB140 × 250 × 88available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 140 × 250 × 88mm
Cdynamic 915kN

Spherical roller bearing 23228.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

Will 23228 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet