+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 2318 KM: ⌀90 × ⌀190 × 64 mm⌀190⌀90642318 KM
Fig. 1: 2318 KM, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2318 KM

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 2318 KM

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
ISO designation
Equivalents
2 exact, 1 approximate
d
90 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
190 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
64 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
01

Equivalents

the same size 90 × 190 × 64 from other brands

3 products
Cross-section drawing to size: Self-aligning ball, 90 × 190 × 64 mm
You are viewingSKF 2318 KM

Everything the number specifies matches: series 23, 90 × 190 × 64 mm, open, no protection, K, normal clearance, special design. The codes in the number are read against the SKF catalogue.

  • Cross-section drawing to size: Self-aligning ball, 90 × 190 × 64 mm2318 KMThis bearingSKF90 × 190 × 64available to orderon requestyou are here
  • Series illustration (not a photo of this item): 2318 K2318 KNSK90 × 190 × 64available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 90 × 190 × 64mm

Self-aligning ball bearing 2318 K.

Frequently asked questions

Will 2318 C3 fit instead?

Same size, clearance greater than normal. C3 is used where the bearing runs hot or sits on the shaft with an interference fit. If the old bearing is not marked C3, take this one.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet