+380 50 364 66 46 Mon–Fri 8:00–17:00 Kyiv time Wishlist0 Compare0
Drawing of 2310: ⌀50 × ⌀110 × 40 mm⌀110⌀50402310
Fig. 1: 2310, end view and section; internal parts simplified per ISO 8826-1. Dimensions in mm

There is no photo of this product: the drawing shows the dimensions of 2310

Load: radial medium; axial low, on both sidesSelf-aligning ball

Bearing SKF 2310

Price on request
Available to order
Request a quote

Specifications

Manufacturer number
GOST number
Equivalents
5 exact, 7 approximate
d
50 mm
Bore diameter dBearing bore = shaft diameter. Source: supplier data
D
110 mm
Outside diameter DOutside diameter = housing bore. Source: supplier data
B
40 mm
Width BRing width. Source: supplier data
Seal
open, no protection
Clearance
normal clearance
C
63.7 kN
Basic dynamic load rating CLoad for one million revolutions at 90 % reliability; the L10 life is calculated from it as (C/P)^p. ISO method, manufacturer’s figure: do not carry it over to another brand. Source: supplier data
01

Equivalents

the same size 50 × 110 × 40 from other brands

12 products
Series illustration (not a photo of this item): 2310
You are viewingSKF 2310

Everything the number specifies matches: series 23, 50 × 110 × 40 mm, open, no protection, normal clearance, ordinary steel, design without special letters. The codes in the number are read against the SKF catalogue.

  • Series illustration (not a photo of this item): 23102310This bearingSKF50 × 110 × 40available to orderon requestyou are here
  • Series illustration (not a photo of this item): 23102310CT50 × 110 × 40147 pcs€6.90Request a quote
  • Photo: 23102310Z&S50 × 110 × 40available to order€22.70Request a quote
  • Series illustration (not a photo of this item): 23102310no brand50 × 110 × 40available to orderon requestRequest a quote
  • Series illustration (not a photo of this item): 23102310KG50 × 110 × 40available to orderon requestRequest a quote
02

Details

what this bearing is, questions

About the bearing

d×D×Bsize 50 × 110 × 40mm
Cdynamic 63.7kN

Self-aligning ball bearing 2310. Under GOST the same bearing is designated 1610.

C: SKF data. Another brand publishes its own figures, so compare them against that brand’s catalogue.

Frequently asked questions

What is 1610?

It is the same bearing under GOST 3189-89: 1610 corresponds to the ISO base 2310. Size 50 × 110 × 40 mm, a full equivalent of 2310.

Can I fit another brand instead of this bearing?

Without checking, only an exact equivalent: the size, seal, clearance and design match according to the brand’s catalogue. Positions with the same geometry differ in seal, clearance or design, and each one says so in the equivalents block. Load ratings differ between manufacturers, so for a heavily loaded unit compare C.

How do I get a price and a lead time?

Press “Request a quote” and send the part number and quantity. We reply with the price, availability and delivery terms for your country.

03

Reviews

No reviews yet